Rani Gunj, Secunderabad, Hyderabad, Telangana
GST No. 36BKMPB1040A1ZZ
Send Email
0804826548790% Response Rate
Search
Pipe Fittings
We are a leading Manufacturer of ss 304 view glass f/e, stainless steel nipples, ss 316 bend, 316 titanium bend, ss 317l bend and mild steel pipe flange from Secunderabad, India.SS 304 VIEW GLASS F/E
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Size | AII |
| Usage/Application | Chemical Fertilizer Pipe |
| Finishing | DALIY |
| Housing Weld Flange | TC |
| Steel Grade | 304 / 316 |
| Country of Origin | Made in India |
Sight glasses are transparent industrial glass that are used for observing levels of liquids or gases inside of a pipe, tank, or boiler. This is critical as it allows plant managers or engineers to look inside their systems without disrupting the flow of operations.
Additional Information:
Yes! I am Interested
Stainless Steel Nipples
REQUEST CALLBACK
Get Best Quote
Approx. Rs 90 / PieceGet Latest Price
Product Details:| Size | 1/2 inch |
| End Connection Type | Buttweld |
| Material | Stainless Steel |
| Usage/Application | Plumbing Pipe |
| Surface Finish | Powder Coated |
| Country of Origin | Made in India |
Stainless steel nipples are used for threaded connection between industrial fittings and pipe fittings and are available in various grades, diameters and threads. In its most basic form, the stainless nipple is a short threaded fitting with male threads at both ends for connecting other fittings.
Yes! I am Interested
Ss 316 Bend
REQUEST CALLBACK
Get Best Quote
Approx. Rs 120 / PieceGet Latest Price
Product Details:| Size | 2.5-3 inch |
| Material Grade | SS 321 |
| Usage/Application | Gas Pipe, Chemical Fertilizer Pipe |
| Technique | Hot Rolled |
| Material | Stainless Steel |
Stainless Steel 316 Pipe Fittings is one such product made up of 316 grade. It is also referred to as marine grade. These UNS S31600 SS Pipe Bend are said to offer better mechanical and corrosion resistance properties as compared to other stainless steel grades.
Yes! I am Interested
316 Titanium Bend
REQUEST CALLBACK
Get Best Quote
Approx. Rs 150 / PieceGet Latest Price
Product Details:| Size/Diameter | 3 inches |
| Usage/Application | Pneumatic Connections, Hydraulic Pipe |
| Material | Titanium |
| Diameter | 2-2.5 Inch |
| Wall Thickness | 4-5 mm( Wall Thickness) |
PRICE VARIED ON SIZE.
Yes! I am Interested
SS 317L Bend
REQUEST CALLBACK
Get Best Quote
Approx. Rs 128 / PieceGet Latest Price
Product Details:| Material Grade | SS 317 L |
| Usage/Application | Chemical Fertilizer, Gas Pipe |
| Technique | Hot Rolled |
| Material | Stainless Steel |
Bent stainless steel tubes are particularly required for use in external environments. This is because of their resistance to corrosion, which is very important when surfaces are put to the test by atmospheric agents, without losing any of their mechanical strength.
Yes! I am Interested
Mild Steel Pipe Flange
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product Details:| Size | 2 inch |
| Material Standard | ASTM A182 |
| Usage/Application | Industrial |
| I Deal In | New Only |
| Country of Origin | Made in India |
Mild Steel Flanges are carbon steel flanges with low or mild carbon content. These flanges have high ductility, strength and a certain degree of corrosion resistance. The flanges of this grade are used with mild carbon steel pipes.
Yes! I am Interested
Industrial Mild Steel Flanges
REQUEST CALLBACK
Ask for Price
Product Price :Get Latest Price
Product Details:| Size | 4 inch |
| Material Standard | ASTM A182 |
| Usage/Application | Industrial |
| Is It Rust Proof | Yes |
| Country of Origin | Made in India |
Mild Steel Flanges are carbon steel flanges with low or mild carbon content. These flanges have high ductility, strength and a certain degree of corrosion resistance. The flanges of this grade are used with mild carbon steel pipes.
Yes! I am Interested
Stainless Steel Reducing Tee
REQUEST CALLBACK
Get Best Quote
Approx. Rs 500 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30000 Piece |
| Thread Size | 1/2'' To 30'' |
| Material Standard | Thick. |
| Technique | Hot Rolled. |
| Surface Finish | Polished. |
| Size | 1/2 inch |
| Material Grade | SS 316 and 304 |
| Shape | Round |
| Country of Origin | Made in India |
PRICES ARE BASED ON THE SIZES
Additional Information:
Yes! I am Interested
Stainless Steel Elbow
REQUEST CALLBACK
-
-
-
- +2
Get Best Quote
Approx. Rs 120 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 25000 Piece |
| Nominal Size | 1/2" to 25" |
| Product Type | Short Radius |
| Nominal Diameter | VARIED ON SIZE |
| Bend Angle | 90 degree |
| Usage/Application | Structure Pipe |
| Material | S.S ELBOW |
| Size | 1/2'' To 25'' Inch ( Diameter ) |
| Schedule | SCH- 10,SCH- 20, SCH- 40, SCH- 80 & SCH- 160 |
| Weight | ACCORDING TO THE SIZES |
| End Connection Type | Buttweld |
| Tensile Strength | 510 to 600 MPa |
| Thickness | 3-20 mm |
| Country of Origin | Made in India |
A stainless steel pipe elbow fitting is a key part of a piping system for changing the fluid flow direction. It is used to connect two pipes with the same or different nominal diameters and to make the pipe turn in a certain direction of 45 degrees or 90 degrees
Additional Information:
Yes! I am Interested
Ss Pipe Elbow
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 10 Piece |
| Size | 1/2" TO 36" |
| Nominal Size | all |
| Material | SS |
| Elbow Bend Angle | 90 degree |
| Bend Angle | all |
| Elbow Type | Short Radius |
| End Connection Type | BUTTWELD, SOCKETWELD & THREADED |
| Usage/Application | IN ALL |
| Schedule | all |
| Thickness | 1.2MM TO 36MM |
| Country of Origin | Made in India |
Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree. Request for 90 Degree Elbow.
Additional Information:
Yes! I am Interested
SS THIC Pipe Nipples
REQUEST CALLBACK
-
-
-
- +2
Get Best Quote
Approx. Rs 90 / PieceGet Latest Price
Product Details:| Size | 1/2 inch |
| Material | SS |
| End Connection Type | Buttweld |
| Usage/Application | Plumbing Pipe |
| Packaging Type | Packet |
| Country of Origin | Made in India |
Stainless steel nipples are used for threaded connection between industrial fittings and pipe fittings and are available in various grades, diameters and threads. In its most basic form, the stainless nipple is a short threaded fitting with male threads at both ends for connecting other fittings.
Yes! I am Interested
Tri Clover Clamp
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 200 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 5000 Piece |
| Size | 1/2" TO 14" |
| Material | SS |
| Type of Clamp | C Clamp |
| Class | Medium Duty |
| Locking Screw | VARIED ON SIZES. |
| Color | POLISH FINISHING |
| Country of Origin | Made in India |
Tri Clover Unions or otherwise known as a Tri Clamp Union, are a sanitary union typically used in food and beverage applications where hygienic lines are needed. Tri clover unions are popular due to ease of use and the ability to quickly connect or disconnect a process line.
Additional Information:
Yes! I am Interested
Stainless Steel Dairy Fittings
REQUEST CALLBACK
-
-
-
- +1
Get Best Quote
Approx. Rs 180 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 5000 Piece |
| Material Grade | SS 304, 304L, 316, 316L |
| Shape | Different Shapes are Available |
| Size | 1/2" x 6" |
| Standard | DIN / SMS / IDF /BSP / NPT / TRICLOVER |
| Usage/Application | STRUCTURE, HYDRAULIC & CHEMICAL FERTILIZER PIPE. |
| Brand | NA |
| Material | TEE, REDUCER, ELBOW, UNION, CLAMP |
| Thickness | 1.2MM TO 3MM |
| Features | NA |
| Technics | NA |
| Model Name/Number | NA |
| Pressure Rating | NA |
| Operating Temp. | NA |
| Capacity | NA |
| Packaging Type | NA |
| Color | Electropolished |
| Elbow Bend Angle | 90Deg |
| Elongation | NA |
| Head Code | NA |
| Power | NA |
| Is It Customized | Customized |
| Bend | Dairy bend |
| Clamping Screw | NA |
| Coating | NA |
| Connection Type | Welded |
| Density | NA |
| Design | NA |
| Designation | NA |
| Diameter | 1/2" to 4" |
| Dimension Standard | 1/2" |
| Elbow Degree | 90 Deg |
| End Connections | Welded |
| Fittings | All Fittings Bends, Tee, Tc Set etc. |
| Flow M Cube Per Hr | NA |
| Form | Na |
| Handle Material | NA |
| Is It ISO Certified | Yes |
| Is It Lcd Display | No |
| Item Code | 730729 |
| Media Type | NA |
| Min Order Quantity | 100 Nos (Only In Hyderabad) |
| Modulus | NA |
| Nominal Diameter | NA |
| Oem Service | NA |
| Port Of Dispatch | NA |
| Pressure Kg Per Cm Square | NA |
| Quantity Per Pack | Packed as per requirement. |
| Range | Na |
| Rated Pressure Bar | Na |
| Schedule | 16 & 18 Gauge. |
| Single Piece Length | 6 Mtrs (pipe) |
| Stress | na |
| Surface Finishing | Electropolished |
| Surface Treatment | NA |
| Technique | NA |
| Temperature Resistant | NA |
| Tensile Strength Mpa | NA |
| Thread Size | NA |
| Thread Type | No |
| Tolerance | NA |
| Type Of Pipes | Seamless & Welded |
| Valve Size | 1/2" to 4" |
| Viscosity M Square Per Sec | Na |
| Voltage V | Varied on Sizes. |
| Warranty | Yes |
| Weight | Na |
| Weld Type | Yes |
| I Deal In | New Only |
| Country of Origin | Made in India |
These Dairy fittings are suitable for the Pharmaceutical, Food & Beverage, Dairy, and Brewing industry. These Fittings are available in stainless steel 304 & 316 grades which makes them easy to clean and Hygienic.
Additional Information:
Yes! I am Interested
Stainless Steel Elbow
REQUEST CALLBACK
Get Best Quote
Approx. Rs 290 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 10000 Piece |
| Elbow Bend Angle | 90 degree |
| Elbow Type | Long Radius |
| End Connection Type | Threaded |
| Material | Alloy Steel |
| Usage/Application | Gas Industry, Refinery Industry |
| Size | 1.5-2 Inch( Diameter) |
| Schedule | SCH- 10, SCH- 20, SCH- 40, SCH- 80 & SCH- 160 |
| Weight | NA |
| Thickness | 2-3 mm ( Wall Thickness) |
A stainless steel pipe elbow fitting is a key part of a piping system for changing the fluid flow direction. It is used to connect two pipes with the same or different nominal diameters and to make the pipe turn in a certain direction of 45 degrees or 90 degrees.
Additional Information:
Yes! I am Interested
SS Socket Weld Coupling
REQUEST CALLBACK
Get Best Quote
Approx. Rs 150 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 500 Piece |
| Size | 1/2 inch |
| Material | SS |
| Fitting Type | Coupler |
| Usage/Application | Plumbing Pipe |
| Country of Origin | Made in India |
Socket welding (SW) is used for welding pipes and fittings including reducers, tees and elbows. Socket weld pipe fittings are used to permanently join pipes that are inserted into a recess in the fitting, flange or valve. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.
Additional Information:
Yes! I am Interested
Stainless Steel Pipe Coupling
REQUEST CALLBACK
-
-
-
- +2
Get Best Quote
Approx. Rs 90 / KilogramGet Latest Price
Product Details:| Minimum Order Quantity | 10000 Kilogram |
| End Connection Type | Threaded |
| Type of Coupling | Full |
| Size | 3-3.5 Inch |
| Pressure Rating | NA |
| Length | Regular |
| Model Name/Number | NA |
| Surface Finish | NA |
| Flow Rate | NA |
| Packaging Size | As per Requirement. |
| Packaging Type | Gunny Bags |
| Tensile Strength | NA |
| Thickness | 6-7 mm ( Wall Thickness ) |
| Weight | NA |
| Valve Type | NA |
| Usage/Application | Structure Pipe, Gas Pipe |
| Material | Stainless Steel |
| Technique | Hot Rolled |
Stainless Steel Pipe Fittings are known for their high strength, excellent corrosion resistance and long service life. The SS 304 Coupling is durable as well as withstand to high pressure. It is common used to connect pipes within 4 inches.
Additional Information:
Yes! I am Interested
Ss Equal Tee 304 Grade
REQUEST CALLBACK
-
-
-
- +5
Get Best Quote
Approx. Rs 150 / PieceGet Latest Price
Product Details:| Surface Finish | Anodized, Mill Finished, Finished Polished |
| Thickness | 2-3 mm (Wall Thickness) |
| Material | Stainless Steel |
| Size | 1-2 Inch (Diameter) |
| Usage/Application | Gas Pipe, Plumbing Pipe |
316 contains a minimum 2.0% molybdenum which makes it much more corrosion resistant than 304 however, as it is a more expensive element, generally makes 316 a more expensive grade of metal.
Yes! I am Interested
Stainless Steel Stub End
REQUEST CALLBACK
Get Best Quote
Approx. Rs 90 / PieceGet Latest Price
Product Details:| Size | 3-3.5 Inch |
| Material | Stainless Steel |
| Usage/Application | Pneumatic Connection, Gas Pipe |
| Technique | Hot Rolled |
| Wall Thickness | 3-4 mm |
Stub End is a type of pipe fitting used to connect pipes together. The fitting has a stub or a piece of pipe with an outward flare on one side. This enables the fitting to be welded to a pipe of same diameter and wall thickness.
Yes! I am Interested
Stainless Steel 304 Elbow
REQUEST CALLBACK
-
-
-
- +2
Get Best Quote
Approx. Rs 180 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 15000 Piece |
| Size/Diameter | 2 inches |
| Nominal Size | 1/2" TO 8" |
| Product Type | Short Radius |
| Nominal Diameter | VARIED ON SIZE |
| Bend Angle | 90 degree |
| Usage/Application | Plumbing Pipe |
| Schedule | SCH- 10,SCH- 20, SCH- 40, SCH- 80 & SCH- 160 |
| Thickness | 1.5MM TO 3MM |
| End Connection Type | Buttweld |
| Country of Origin | Made in India |
PRICE VARIED ON SIZES.
Additional Information:
Yes! I am Interested
SS Elbow
REQUEST CALLBACK
-
-
-
- +2
Get Best Quote
Approx. Rs 144 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 10000 Piece |
| Nominal Size | 1/2" TO 36" |
| Product Type | Long Radius |
| Bend Angle | 90 degree |
| Usage/Application | Plumbing Pipe |
| Schedule | SCH- 10,SCH- 20, SCH- 40, SCH- 80 & SCH- 160 |
| Thickness | 1.2mm |
| End Connection Type | Buttweld |
| Country of Origin | Made in India |
A stainless steel pipe elbow fitting is a key part of a piping system for changing the fluid flow direction. It is used to connect two pipes with the same or different nominal diameters and to make the pipe turn in a certain direction of 45 degrees or 90 degrees
Additional Information:
Yes! I am Interested
Stainless Steel Ferrule Fitting
REQUEST CALLBACK
Get Best Quote
Approx. Rs 200 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 10 Piece |
| Size/Diameter | 2 inches |
| Material | SS |
| Type | NA |
| Size | 1 inch-2 inch |
| Usage/Application | NA |
| Connection | Male, Female & Welded |
| Material Grade | SS 304, 304L, 316, 316L |
| Is It Rust Proof | Rust Proof |
| Thread Size | BSP Threaded |
| Surface Finish | Mirror Finishing |
Price Based On Sizes.
Additional Information:
Yes! I am Interested
316 Tee
REQUEST CALLBACK
Get Best Quote
Approx. Rs 540 / PieceGet Latest Price
Product Details:| Size | 1/2" to 8" |
| Type of Tee | Straight and Reducing |
| Material | SS |
| End Connection Type | Buttweld |
| Usage/Application | plumbing, gas Pipe, Chemical handling pipe |
| I Deal In | New Only |
| Valve Option | No |
| Brand | Jindal |
Industrial usage, Pharmaceutical and Chemicals Industries. all other Industries usage. We offer stainless steel tee fittings 316. that are widely applied in industry tubings to merge or divide fluids. These stainless steel tee fittings are available in different grades to suit the requirement of various industry applications.
Yes! I am Interested
Slip On Flanges
REQUEST CALLBACK
Get Best Quote
Approx. Rs 210 / PieceGet Latest Price
Product Details:| Material | Stainless Steel |
| Size | >30 Inch |
| Pipe Size | 1/2 inch |
| Material Standard | ASTM A105 |
| Country of Origin | Made in India |
Slip-on flanges, also known as 'hubbed flanges', have a hub with a very low profile. This type of flange is usually connected to a pipe by one or two fillet welds (one outside the flange and one inside the flange), it is however possible to use only a single weld.
Yes! I am Interested
Ss 304 Hose Nipples
REQUEST CALLBACK
-
-
-
- +3
Get Best Quote
Approx. Rs 30 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 30000 Piece |
| Nominal Pipe Size | 2 inches |
| Size | all |
| Type of Nipple | all |
| Thread Length | Varied on Sizes. |
| Usage/Application | All the Above. |
| Material | Stainless Steel |
| Thickness | 3/8'' X 2'' |
| Surface Finish | Stainless Steel |
| Shape | Round ( Head Shape ) |
| Technique | Hot Rolled |
| End Connection Type | Thread |
| Country of Origin | Made in India |
PRICE VARIED ON SIZE
Additional Information:
Yes! I am Interested
Looking for Pipe Fittings ?
X
Explore More Products
Contact via E-mail
Contact via SMS
R.B. Bishnoi (Proprietor)
Royal Metal Industries
Royal Metal Industries
H No. 5-1-570, Ground Floor, Hill Street, Ranigunj, Near City Light Hotel
Secunderabad - 500003, Hyderabad, Telangana, India
Secunderabad - 500003, Hyderabad, Telangana, India
Call Us: Call Response Rate: 90%
© Royal Metal Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited